MOESOF Endurance Seat GEN2
MOESOF® LLC has released a second generation of their Motorcycle Endurance Seat. Endurance Seats dramatically increase the volume of available seating material by holding two foam cylinders in place on either side of an existing motorcycle seat. If you struggle with discomfort on your factory seat, the Endurance Seats available at MOESOF.com offer a possible solution.
A MOESOF Endurance Seat consist of two foam cylinders captured by a series of straps arranged in a webbing like structure. When laid across the top of an existing seat the MOESOF foam cylinders dramatically increase the volume of seating foam available to a rider vs. the foam of the existing seat alone.
MOESOF uses their own reinforced ergonomic EPP foam cylinders. The load bearing straps are made of heavy polyester because of its resistance to stretching. And the anchors are made of sheathed flat bungee cord for its range of elasticity and longevity. The GEN 2 Endurance Seats are held in place with four gutter hooks clipped under the seat pan of the existing seat and install or uninstall in seconds.
MOESOF Endurance Seat create a bridge between rider and seat, a boundary layer designed to modify how the two forces of rider weight and seat compression interact. MOESOF’s patented Dual Loop Strap design works in concert with their foam cylinders. Rider weight applied to the top of an Endurance Seat will try to force the foam cylinders downward under compression. The straps that capture the foam cylinders resist this movement and experience tension. The result is a surprisingly rigid truss-like structure between rider and seat. This structure clamps down around the existing seat supporting it, effectively re-directing the load to come to rest against both the tops and the sides of the existing seat.
A seat with more surface area to sit on would sag without more surface area to support it. MOESOF Endurance Seats find this additional supporting surface by exploiting the previously unused vertical surfaces of the side of the existing seat. This is how MOESOF creates the foundation of support to keep Endurance Seats flat and firm under load and over time.
Endurance and Safety
MOESOF Endurance Seats add real width to narrow seats and firmness to overly soft wide seats, removing pressure points and more evenly distributing loads out to a rider’s hips and thighs. It’s a dramatically different seating experience. Add the portability of MOESOF seats and riders have the option of two distinctly different seating experiences on the same trip. If a rider fatigues of one they can easily switch to the other. With each switch, a rider is in effect resetting the “fatigue clock” of their seat. This ability to toggle between two distinctly different can greatly increase comfort on long rides.
Discomfort is a safety issue. Comfortable riders have fewer distractions than uncomfortable riders. With less distraction, comfortable riders have more attention to focus on safely navigating the conditions ahead. If your current seat is a source of distraction, MOESOF Endurance Seats are a new and functional remedy and should be on anyone’s list of viable solutions to consider. MSRP: $139.95 MOESOF.com